|
|
KEY FEATURES
- Ideal for mobile treatment engineers.
- Compact & portable design.
- Easy to follow waterproof instructions.
- Clear product labelling.
- Key treatment parameters included;
- Conductivity/TDS,
- pH (0.00 to 14.00),
- Temperature,
- Iron HR (0.5 to 10 mg/l),
- Molybdate (0 to 500 mg/l),
- Nitrite HR (0 to 2000 mg/l).
Note: Range is dependant on measuring instrument used.
|
|
COMPREHENSIVE KIT
The DTK comprehensive Closed System Test Kit for heating and chilled water systems has been developed specifically for engineers and treatment professionals responsible for the maintaining and management of closed water systems. This test kit has been designed to include the key parameters which enable the optimum operating conditions in these water systems.
The kit provides accuracy and speed, utilising drop test and comparator reagents together with electronic meters for the most efficient monitoring of water samples. The reagents and equipment are specified below.
The CLK003 is supplied in a robust carry case with reagents and instruments secured by a high quality chemical resistant foam insert with sufficient chemical reagents to carry out between 100 and 200 tests.
INDUSTRIAL WATER TREATMENT
Closed Water Systems for Low Pressure Hot Water (LPHW), Chilled Water & Heating require regular and careful monitoring to ensure the correct water conditions are maintained within an approved treatment programme.
Any failure to maintain the correct levels and dosing of the chemical treatments can lead to;
- Corrosion of the system (leaks),
- Formation of scale (blocked pipes),
- Increased biological activity.
These can lead to unstable water conditions with potential negative consequences to the life of the plant and operating costs.
|
|
Test Kit and Contents
CLK003 – Standard Closed Water Systems Test Kit
| Contents |
Range |
Displayed As |
Code |
| TEKNO 2011 Medium Case with Foams |
|
|
EDT028/2 |
| Waterproof Instructions |
|
|
EDT084 |
| 20 ml Standard Syringe |
|
|
EDT168 |
| 5/10 ml Tube c/w Screw Top |
|
|
EDT015 |
| CHECKIT® Comparator |
|
|
EDT085 |
| 2 x 10 ml Square Plastic Cells |
|
|
EDT006 |
| pH1 – pH/Temperature Meter |
0 to 14
|
|
PH1S |
| EC1 – Conductivity/TDS/Temperature Meter |
0 to 20.00
|
mS |
EC1S |
| 30ml Calibration Cup x 2 |
|
|
EDT384 |
| Iron HR (Comparator) |
0.05 to 10
|
mg/l Fe |
|
| CHECKIT® Iron HR Disk |
|
|
146320 |
| FE6 (65 ml) |
|
|
SDT113-65 |
| FE8 (65 ml) |
|
|
SDT128-65 |
| Molybdate VHR (Comparator) |
0 to 500
|
mg/l MoO4 |
|
| Molybdate VHR Disk |
|
|
146295 |
| Molybdate HR (65 ml) |
|
|
SDT127 |
| Nitrite (Drop Test) |
10 to 2000 |
mg/l NaNO2 |
|
| N1 (65 ml) |
|
|
SDT072 |
| N2 (65 ml) |
|
|
SDT073 |
| Calibration Solutions for EC1 & pH1 Meter |
|
|
|
| Conductivity Standard 1413 µS (65 ml) |
|
|
SDT109-65 |
| pH 4 Buffer Solution (65 ml) |
|
|
SDT119-65 |
| pH 7 Buffer Solution (65 ml) |
|
|
SDT118-65 |
| pH 10 Buffer Solution (65 ml) |
|
|
SDT161-65 |
CLK003F – Closed Water Systems Test Kit Plus Filtration
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Syringe Filter Holder |
|
|
EDT044 |
| Filter Papers 25mm 0.45 Micron (50 pk) |
|
|
EDT061 |
| 20ml Leur Lock Syringe (In place of 20ml standard syringe) |
|
|
EDT075 |
CLK003FB – Closed Water Systems Test Kit Plus Filtration and Bromine
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Syringe Filter Holder |
|
|
EDT044 |
| Filter Papers 25mm 0.45 Micron (50 pk) |
|
|
EDT061 |
| 20ml Leur Lock Syringe (In place of 20ml standard syringe) |
|
|
EDT075 |
| Bromine (Comparator) |
0 to 5 |
mg/l Br2 |
|
| CHECKIT® Bromine Comparator Disk (0 to 5 ppm) |
|
|
146280 |
| DPD No.1 Tablets (50 pk) |
|
|
SDT106-50 |
| DPD Nitrite Powder (20 g) |
|
|
SDT295-20 |
CLK003CH – Closed Water Systems Test Kit Plus Chlorine HR
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Chlorine HR Total (Comparator) |
10 to 300 |
mg/l Cl2 |
|
| CHECKIT® Chlorine HR Comparator Disk (10 to 300 ppm) |
|
|
146030 |
| Chlorine HR Reagent (30 ml) |
|
|
SDT179-30 |
| Acidifying Solution (30 ml) |
|
|
SDT180-30 |
CLK003AL – Closed Water Systems Test Kit Plus Aluminium
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Aluminium (Comparator) |
0 to 0.3 |
mg/l Al |
|
| CHECKIT® Aluminium Comparator Disk (0 to 0.3 ppm) |
|
|
146200 |
| Aluminium No.1 Tablets (50 pk) |
|
|
SDT147-50 |
| Aluminium No.2 Tablets (50 pk) |
|
|
SDT148-50 |
CLK003CO – Closed Water Systems Test Kit Plus Copper
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLF003 |
| Copper Free & Total (Comparator) |
0 to 5 |
mg/l Cu |
|
| CHECKIT® Copper Free & Total Comparator Disk (0 to 5 ppm) |
|
|
146200 |
| Copper No.1 Tablets (50 pk) |
|
|
SDT239-50 |
| Copper No.2 Tablets (50 pk) |
|
|
SDT240-50 |
CLK003T – Closed Water Systems Test Kit Plus Tannin
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Tannin (Drop Test) |
10 to 300 |
mg/l |
|
| TN1 – Tannin Buffer (40 g) |
|
|
SDT094-40 |
| TN2 – Tannin Titrant (65 ml) |
|
|
SDT095-65 |
|
CLK003R – Closed Water Systems Test Kit Plus Refractometer
| Contents |
Range |
Displayed As |
Code |
| Standard Closed Water Systems plus: |
|
|
CLK003 |
| Refractometer for MEG & PEG |
|
|
EDT056 |
